<listing id="1jv5f"></listing>
<var id="1jv5f"></var>
<cite id="1jv5f"></cite>
<listing id="1jv5f"></listing>
<cite id="1jv5f"></cite>
<var id="1jv5f"></var>
<var id="1jv5f"></var>
<cite id="1jv5f"></cite>
<cite id="1jv5f"><strike id="1jv5f"><thead id="1jv5f"></thead></strike></cite> <menuitem id="1jv5f"><strike id="1jv5f"></strike></menuitem>

   Features and Applications
Zirconium-aluminium Getter is made by compressing alloys of zirconium with aluminium into a metallic container or coating the alloys on metallic strip.The getter can be used together with Evaporable Getter to improve gettering performance.
It also can be used in the devices that Evaporable Getter is not allowed.This product is in three shapes----ring,strip and DF tablet and the strip getter is produced by advanced base strip technology,which has much better sorption performance than the getter produced by direct rolling.Zirconium-aluminium Getter is in wide use in vacuum electronic devices and electric lighting products.
 Basic Characteristics and General Data
type
Outline Drawing
Active
surface(mm
2)
Content of aluminium alloy of zirconium
Z11U100X
PIC 2
50
100mg
Z5J22Q
PIC 3
-
9mg/cm
Z8J60Q
PIC 4
-
30mg/cm
Z8C50E
PIC 5
25
50mg
Z10C90E
50
105mg
Z11U200IFG15
-
100
200mg

Suggested Activation Conditions
Zirconium-aluminium Getter can be activated by heating with high frequency inductive loop,thermal radiation or other methods.Our suggested activation conditions are 900℃ * 30s,and maximal initial pressure 1Pa.

Suggested Activation Conditions
Temperature
750℃
800℃
850℃
900℃
950℃
Time
15min
5min
1min
30s
10s

Maxinal Initial Pressure
1Pa
PIC 1
PIC 2
PIC 3
PIC 4
PIC 5


Caution
When Zirconium-aluminium Getter is used in the N2-filled interlayer of a metal halide lamp to sorb exhaust,it can not be activated by heating and the getter operating temperature must keep on 400±50℃,Thus, the getter can sorb exhaust but not sorb N2 continually.

The environment to store getter shall be dry and clean,and relative humidity lower than 75%,and temperature lower than 35℃,and no corrosive gases.Once the original packing has been opened,getter shall be used up soon and usually it shall not be exposed to the ambient atmosphere more than 24 hours. Prolonged storage of getter after the original packing has been opened shall be always in containers under vacuum or in a dry atmosphere.

 

All Rights Reserved Copyright; Nanjing Huadong Electronics Vacuum Material Co.,Ltd
Add:No.1, Jiulongshan Road, Qixia Economic Development Zone, Nanjing, P.R.China Post: 210034
TEL: 025-85778933 Sales hotline: 025-85323072
 
亚洲欧美日韩高清一区/japanese国产在线视频/欧美性色15P